Stihl HS 85 Service Workshop Manual

Stihl HS 85 Service Workshop Manual Repair

Stihl HS 85 Service Workshop Manual for the Stihl Hedge Trimmer. Repair and service the HS85 with this manual, which contains clear repair photos. The manual contains diagrams and accurate information as used by professional mechanics and repair shops to troubleshoot and repair the Hedge Trimmer. View free page images online or download full PDF that you can print or view on any suitable device. The manuals have plenty of pictures and diagrams to make the entire repair process easy for you. Can be used as guides for other models as they may share key components such as motors.

Stihl HS 85 Service Workshop Manual Contents

Introduction, Specifications, Troubleshooting Attachments, Clutch, Engine, Ignition, Starter, Servicing, Controls, Fuel System, Special Tools.

The HS 85 PDF manual contains very detailed diagrams and descriptions. At the click of a mouse you have access to the most comprehensive diagnostic, repair and maintenance information as used by professional mechanics, technicians and repair workshops. Very clear and precise diagrams and instructions. The manual is designed to get the information you need quickly and easily.

Stihl HS 85 Specifications

Engine: .94 bhp 2-Stroke
Fuel Capacity: 12.5 oz
Single cylinder two-stroke engine
Displacement: 1.55 cu.in (25.4 cm3)
Bore: 1.34 in (34 mm)
Stroke: 1.10 in (28 mm)
Idle speed: 2800 rpm

Adjusting the Carburetor

Your carburetor does not have a high speed adjusting screw (H screw). Adjustment of maximum engine speed is not necessary. The carburetor is set at the factory to provide an optimum fuel-air mixture under most operating conditions. Idling and part-load emissions are minimized by limiting the idle mixture.

Adjusting Idle Speed

Engine stops while idling: Check standard setting. (L screw must be one turn open) : Turn idle speed screw (LA) slowly clockwise until the cutting blades start running and then turn one half
turn counterclockwise. Cutting blades run when engine is
idling: Check standard setting. (L screw must be one turn open) : Turn idle speed screw (LA) slowly counterclockwise until the cutting blades stop running at idle speed and turn the screw about another one half turn in the same direction.

Stihl HS 85 Service Workshop Manual Diagram

[ngg_images source=”galleries” container_ids=”65″ display_type=”photocrati-nextgen_basic_imagebrowser” ajax_pagination=”0″ order_by=”sortorder” order_direction=”ASC” returns=”included” maximum_entity_count=”500″]