Stihl 038 Magnum Service Workshop Manual

Stihl 038 Magnum Service Workshop Manual Repair

Stihl 038 Magnum Service Workshop Manual for the Stihl chainsaw. Repair and service the 038 Magnum with this manual. The manual has diagrams and accurate information as used by mechanics and repair shops to troubleshoot and repair the chainsaw.

View free page images online or download a full PDF that you can print or view on any suitable device.

Stihl Chainsaw service manual contains detailed descriptions of all the typical repair and servicing procedures for this power tool. Make use of the illustrated parts lists while carrying out repair work, it shows the installed positions of the individual components and assemblies helping you check the part numbers of any replacement parts. A fault on the machine may have several causes. To help locate the fault, consult the service manual chapter on Troubleshooting.

The manuals have plenty of pictures and diagrams to make the entire repair process easy for you. Can be used as guides for other models as they may share key components such as motors.

Stihl 038 Magnum Service Workshop Manual Contents

Introduction, Specifications, Troubleshooting Attachments, Clutch, Engine, Ignition, Starter, Servicing, Controls, Fuel System, Special Tools.

This manual is designed to get the information you need quickly and easily.

Stihl 038 Magnum Chainsaw Specifications

SERIES OR ASSEMBLY NUMBER: 1119
YEAR INTRODUCED: 1980
ENGINE DISPLACEMENT: 61ccm (3.72 cu. in.)
CYLINDER BORE: 48mm (1.89 in.)
PISTON STROKE: 34mm (1.34 in.)
CYLINDER TYPE: Aluminum with chrome plated bore
INTAKE METHOD: Piston ported
WEIGHT: 15 lbs. powerhead only
CHAIN BRAKE: Inertia activated
CLUTCH: Centrifugal
DRIVE TYPE: Direct
CONSTRUCTION: Die-cast magnesium
MAGNETO TYPE: Bosch
CARBURETOR: Tillotson HK-29A, 42A, 42B Bing diaphragm type
MAJOR REPAIR KIT: RK-32HK for HK-29A, RK-33HK for HK-42A, B
MINOR REPAIR KIT: DG-1HK
AIR FILTER SYSTEM: Nylon mesh element
STARTER TYPE: Stihl automatic rewind
OIL PUMP: Automatic
MAXIMUM ENGINE RPM: 12,000
IDLE RPM: 2,800
IGNITION TIMING: 2.3 to 2.7mm (0.090 to 0.106 in.) before TDC
BREAKER POINT SETTING: 0.35 to 0.40mm ( 0.014 to 0.016 in.)
SPARK PLUG TYPE: Bosch WSR6F, Champion RDJ7Y
SPARK PLUG GAP: 0.51mm (0.020 in.)
FUEL OIL RATIO: 40:1
RECOMMENDED FUEL OCTANE: Regular
MIX OIL SPECIFICATION: Stihl two-cycle chain saw mix oil
CHAIN PITCH: 3/8 in.
SHORTEST GUIDE BAR SUPPLIED: 40cm (16 in.)
LONGEST GUIDE BAR SUPPLIED: 81cm (32 in.)

Stihl 038 Magnum Service Workshop Manual Diagrams