Stihl 021 Service Workshop Manual Repair
Stihl 021 Workshop Manual for the Stihl chainsaw. Repair and service the 021. The PDF manual has diagrams and accurate information to troubleshoot and repair the chainsaw. View free page images online or download a full PDF that you can print or view on any suitable device.
The manuals have plenty of pictures and diagrams to make the entire repair process easy for you. Can be used as guides for other models as they may share key components such as motors.
More comprehensive carburetor Manuals HERE and a 021 chainsaw parts list HERE. A chainsaw search (magnifier icon) at top of this page, as well as a 021 chainsaw repair help question and answer page HERE.
Stihl 021 Workshop Manual Contents
Introduction, Specifications, Troubleshooting Attachments, Clutch, Engine, Ignition, Starter, Servicing, Controls, Fuel System, Special Tools.
This manual is designed to get the information you need quickly and easily.
Stihl 021 Chainsaw Specifications
First year of production: 1993
Displacement: 35.2 cc (2.15 cu. in.)
Fuel mix: 50:1 with Stihl 2 cycle oil
Standard Cylinder Diameter: 40 mm (1.42 in.)
Piston stroke: 28 mm (1.1 in.)
Cylinder construction: chrome plated aluminum
Crankcase construction: cast magnesium
Walbro Carburetor: WT-215 , WT-286A , WT-503A
Zama Carburetor: C1Q-S11G
Spark Plugs: Bosch WSR6F Spark Plug, Champion RCJ6Y Spark Plug, NGK BPMR7A Spark Plug.
Fuel Mix Ratio: 50:1 with STIHL two-stroke engine oil, 25:1 with other brand name two-stroke, air-cooled engine oils.
Stihl 021 Carburetor Adjustments
Adjusting engine idle speed
A correction at the low-speed screw (L) usually necessitates a change in the setting of the idle speed adjusting screw (LA).
Note: Turn screws very slowly and carefully – even slight movements produce a noticeable change in engine running behavior.
Engine stops while idling
Check standard setting. Turn idle speed screw (LA) clockwise until the chain begins to run then turn it back one quarter turn.
Chain runs while engine is idling
Check standard setting. Turn the idle speed screw (LA) counterclockwise until the chain stops running – and then turn it about another quarter turn in the same direction.
Erratic idling behavior, poor acceleration even though low-speed screw in one turn open
Idle setting too lean-Turn the low-speed screw (L) counterclockwise until the engine runs and accelerates smoothly.
Important: If problems occur on the carburetor or the fuel supply system, always check and clean the tank vent.
The Stihl 021 is a light weight saw that was first introduced in 1993. It is still being made today but in Stihl’s product branding that happened in 2002 it became the MS 210. It quickly became the favorite choice for any keen gardeners or small holders.
Stihl 021 Workshop Manual Diagrams
[ngg_images source=”galleries” container_ids=”149″ display_type=”photocrati-nextgen_basic_imagebrowser” ajax_pagination=”0″ order_by=”filename” order_direction=”ASC” returns=”included” maximum_entity_count=”500″]
Reviews
There are no reviews yet.