Husqvarna 440e Service Workshop Manual

Husqvarna 440e Service Workshop Manual Repair

Husqvarna 440e Service Workshop Manual for the Husqvarna chainsaw. Repair and service the 440e with this manual. The manual contains diagrams and accurate information as used by professional mechanics and repair shops to troubleshoot and repair the chainsaw. View free page images online or download full PDF that you can print or view on any suitable device. The manual has concise pictures or diagrams to make the entire repair process easy for you. Can be used as guides for other models as they may share key components such as motors.

Husqvarna 440e Service Workshop Manual Contents

Introduction, Specifications, Troubleshooting Attachments, Clutch, Engine, Ignition, Starter, Servicing, Controls, Fuel System, Special Tools.

The 440e Husqvarna chainsaw PDF manual contains very clear and precise diagrams and instructions. These manuals are designed to get the information you need quickly and easily.

Husky 440e is a 16-inch, 40.9-cc, gasoline-powered chain saw from Husqvarna weighing 12 lbs. It has a chain brake.

Husqvarna 440e Specifications

Engine
Cylinder displacement, cu.in/cm3 2,49/40,9

Cylinder bore, inch/mm 1,61/41

Stroke, inch/mm 1,22/31

Idle speed, rpm 2900

Power, kW/hp @ rpm 1,6/2,2 @ 9000

Manufacturer of ignition system Walbro

Type of ignition system MBU-33

Spark plug NGK BPMR 7A/Champion RCJ 7Y/Husqvarna PR 17Y

Electrode gap, inch/mm 0,02/0,5

Fuel and lubrication system
Manufacturer of carburetor Zama

Carburetor type Zama EL 41

Fuel tank capacity, US pint/litre 0,78/0,37

Oil pump capacity at 9,000 rpm, ml/min 13

Oil tank capacity, US pint/litre 0,53/0,25

Type of oil pump Not adjustable

Weight
Chain saw without bar or chain, empty tanks, lb/kg 9,3/4,2

Chain/bar
Standard bar length, inch/cm 13″/33

Recommended bar lengths, inch/cm 13-18″/33-46

Usable cutting length, inches/cm 12-17″/31-43

Chain speed at max. power, m/sec 17,3

The spark plug condition is influenced by:
• Incorrect carburetor adjustment.
• An incorrect fuel mixture (too much or incorrect type of
oil).
• A dirty air filter.
These factors cause deposits on the spark plug
electrodes, which may result in operating problems and
starting difficulties.
If the machine is low on power, difficult to start or runs
poorly at idle speed: always check the spark plug first
before taking any further action. If the spark plug is dirty,
clean it and check that the electrode gap is 0.020 inch (0.5
mm). The spark plug should be replaced after about a
month in operation or earlier if necessary.

Correctly adjusted carburetor

When the carburetor is correctly adjusted the machine
accelerates without hesitation and the machine 4-cycles a
little at max. speed. It is also important that the chain does
not rotate at idle. If the L-jet is set too lean it may cause
starting difficulties and poor acceleration. If the H-jet is set
too lean the machine will have less power, poor
acceleration and could suffer damage to the engine.

Husqvarna 440e Service Workshop Manual Diagrams