Husqvarna 435 Service Workshop Manual Repair
Husqvarna 435 Service Workshop Manual for the Husqvarna chainsaw. Repair and service the 435 with this manual. The manual contains diagrams and accurate information as used by professional mechanics and repair shops to troubleshoot and repair the chainsaw. View free page images online or download full PDF that you can print or view on any suitable device. The manual has concise pictures or diagrams to make the entire repair process easy for you. Can be used as guides for other models as they may share key components such as motors.
Husqvarna 435 Service Workshop Manual Contents
Introduction, Specifications, Troubleshooting Attachments, Clutch, Engine, Ignition, Starter, Servicing, Controls, Fuel System, Special Tools.
The 435 Husqvarna chainsaw PDF manual contains very clear and precise diagrams and instructions. These manuals are designed to get the information you need quickly and easily.
Husky 435 is a 16-inch, 40.9-cc, gasoline-powered chain saw from Husqvarna weighing 12 lbs. It has a chain brake.
Husqvarna 435 Specifications
Cylinder displacement, cu.in/cm3 2,49/40,9
Cylinder bore, inch/mm 1,61/41
Stroke, inch/mm 1,22/31
Idle speed, rpm 2900
Power, kW/hp @ rpm 1,6/2,2 @ 9000
Manufacturer of ignition system Walbro
Type of ignition system MBU-33
Spark plug NGK BPMR 7A/Champion RCJ 7Y/Husqvarna PR 17Y
Electrode gap, inch/mm 0,02/0,5
Fuel and lubrication system
Manufacturer of carburetor Zama
Carburetor type Zama EL 41
Fuel tank capacity, US pint/litre 0,78/0,37
Oil pump capacity at 9,000 rpm, ml/min 13
Oil tank capacity, US pint/litre 0,53/0,25
Type of oil pump Not adjustable
Chain saw without bar or chain, empty tanks, lb/kg 9,3/4,2
Standard bar length, inch/cm 13″/33
Recommended bar lengths, inch/cm 13-18″/33-46
Usable cutting length, inches/cm 12-17″/31-43
Chain speed at max. power, m/sec 17,3
”Air Injection” centrifugal cleaning
Centrifugal cleaning means the following: All air to the
carburetor passes through the starter. Dirt and dust is
pushed out by the cooling fan.
IMPORTANT! In order to maintain the operation of the
centrifugal cleaning system it must be regularly
maintained. Clean the air intake to the starter, the fins on
the flywheel, the space around the flywheel, inlet pipe and
Running problems can occur when using the machine in
the cold and snowy conditions caused by:
• Too low engine temperature.
• The icing of the air filter and carburetor.
Special measures are therefore often required:
• Partly mask the air inlet on the starter to increase the
the working temperature of the engine.
There are no reviews yet.